Brtgym's Site

BRTGYM Dumbbells Rack Weight Stand (Rack Only), 13GA Steel Constructed,Max Support 570lbs

Constructed with 13GA Commercial-Grade Steel--- It has a powder-coated finishing, so it can withstand heavy loads while resisting damage to offer you long-lasting utility. Four tiers brackets can support a total weight of up to 470lbs, it is strong enough to hold your 30-50lbs extra heavy dumbbells.<br>A-frame Rack without Wobbling---Triangular-shaped structure dumbbell rack is the sturdiest design. Never Worried about Tipping over even put the 50lbs weight dumbbells on the top. We offer the safest way to store the weights.<br>Extra Storage Area --- 12&quot;×8&quot; middle flat spaces perfect for holding kettlebells or Neoprene Dumbbells or jump ropes or some other things. Save space, organize your home.<br>Rubberized Feet Protect the Floor---Soft rubber mat attached on feet ensures that your floors will not suffer from any scratches due to this rack. ABS plastic black invisible bushing covered on the gaps keep the dumbbells from scratching.<br>Take Full Advantage of Your Fitness Area---Suited to limited spaces as it has compact dimensions:16.3&quot;L x 15.6&quot;W x 24.5&quot;H. Highly recommended for personal or home gym use.

BRTGYM Landmine Base T Bar Row Platform for 1"- 2" Olympic Barbell, 360° Swivel

FOR LANDMINE EXERCISE -- BRTGYM landmine base platform is designed to provide the ability to train the entire body, and do a wide range of Olympic barbell exercises, good for total body workouts: landmine squats, landmine thruster, rotational single-arm press, landmine anti-rotation, split squat, etc.<br>HEAVY 3GA GAUGE STEEL -- 3GA powder coated steel with precision welding process, the solid construction makes the full body works out stable, considered for loaded barbell without bending or warping with long-term use.<br>FITS 1&quot; - 2&quot; OLYMPIC BARBELLS -- The combination of 1&quot; and 2&quot; sleeves makes more choice when you are doing landmine exercises with an Olympic barbell, the inner diameter of sleeves are 1.03 inches and 2.04 inches separately, simply by inserting an Olympic bar into, tighten the screws and let&#39;s do landmine exercises.<br>360° SMOOTH SWVIEL WITHOUT WOBBLING -- This landmine base is a full 360-degree swivel, which allows you to do a wide range of Olympic barbell landmine exercises from a small corner in your home and garage gym. NOTE: COMES WITH ADJUSTABLE TIGHTEN SCREW: There are hex tap bolts between the base and the swivel ring. If it wobbly, tighten the bolts.

BRTGYM Barbell Holder Wall Mount Vertical Storage for Concrete Wall Wood Stud

Build Like A Tank: Hold up to 176lbs, 6.25mm（nearly 1/4&quot; 3GA) thick steel plate covered with black paint coating finish. Bolt it to the wall correctly use with the anchors/screws, it may even hold a tank.<br>Space Saver: Store your barbells vertically, keep them protected off the ground only takes up very little space so that you have more room to store other equipment also have more room to workout.<br>Extra Protective ABS Plastic Layer: Keep the metal of the bars from contacting the metal of the brackets, nice care offered for your bars. When you set it on the hanger they will keep the bar balanced and secure.<br>Lips on the Edge to Prevent Barbell Falling Off: No need to worry about kids pulling bars off by accident, BRTGYM barbell hanger has 3-teeth standing up on edge to lock them in place.<br>Coming with Mounting Hardware: 2pcs concrete anchor, 2pcs wood screws with 2pcs washers. Note: This barbell weight rack is not recommended to be installed into weak drywall. Refer to our video Item Dimensions: 6.3 x 4. 8 x 3 .5inch.The distance between two mounting holes is 1.15&quot;.

BRTGYM Viking Press Landmine Handle Attachment,for 2 inch Olympic Barbell

Compatible with 2&quot; barbell: The ID of our viking press landmine attachment is 2&quot;, which means it works well with any standard 2-inch Olympic bar. Hold down your barbell onto the handle and tighten the knob for a safe workout.<br>Solid Steel Construction: BRTGYM Viking press equipment is made from durable 12GA steel, which could support a maximum weight capacity of 300 lb. Finished with a baking varnish coat reduces scratches and scuffs for long-lasting performance and durability.<br>Comfortable Grips: The OD of the viking press handle is designed to be 1.2 inches, which is more ergonomic and allows you to hold it more comfortably and tightly with three hand position options.<br>Parameter: Toal length-33 inches, total weight-10 pounds. The width between handles is 21 inches which set this item apart from others, and It has plenty of headspaces that allow you to lay down, perform shoulder presses, overhead pressing, and more.

BRTGYM Gym Rack Organizer, Home Gym Accessories Hanger, Wall Mount Hooks for Olympic Barbells

Laser cut 6-Gauge steel construction: Solid steel construction will last a long time, nice black finish fits perfectly into your gym decoration.Please check the e-book instruction in the &quot;Product guides and documents&quot; at the bottom of the page.<br>Heavyweight storage hangers: Designed optimally for weightlift row handles, chains, Olympic barbell and dumbbells. The screw holes spaced 16 Inches to fit standard wall studs.<br>Keeps your gym tidy and well organized: 8 prongs providing loads of convenient storage for your lightweight accessories such as resistance bands, jump ropes. And the foam roller could be stored on top.<br>Size: 16.7&quot; length, 5&quot; depth, 3.2&quot; width, 8 prongs. The mounting holes spaced 16&quot; on center horizontally. Mounting hardware is included. 6.52 LB total weight.

BRTGYM Wall Mounted Weight Plate Holder, Fit 2inch Olympic Weight Plates, Max Weight Capacity 275 lb

275lbs. Load Limit--- Solid Iron construction with rust-proof black paint finish. Support up to 275lbs per holder, and maximum hold up to 3-4 pieces 45lb weight plates.<br>Fit 2inch Olympic Weight Plates--- 8.7&quot; long sleeve lengths x1.9&quot; OD, perfect for 2&quot; standard weight plates.<br>Nylon Protection Buffer--- Designed with nylon buffer ring to protect weight plates from hitting the metal base when racking them on the mount. And also leaves a large enough gap not to pinch your fingers.<br>Saving Space--- Compared to floor rack storage, wall mounted weight plate holder is much more compact which means it is an excellent way to keep your gym clean and get plates off the floor. No more messy stack of weight plates in the corner, just enjoy your tiny and organized home gym.<br>Easy to Install--- Wall-mounted weight rack includes 2pcs hanging posts, 4pcs wood screws for wood stud, and 4pcs expansion bolts for concrete. NOTE: Please don&#39;t install it on drywall, make sure to mount it on the loading wall.

BRTGYM Deadlift Jack Barbell Stand,Carbon Steel Made,Easily Load and Unload 600lb Barbell Plates

A Must-Have Back Saver--- It&#39;s a piece of auxiliary equipment that took a lot of strain off your back when setting up your weights for deadlifts and t-bar rows, make loading and unloading plates so much easier and quicker. Change weight plates in seconds and focus on your exercise plan.<br>Made to Last---BRTGYM deadlift jack constructed of high-quality Carbon Steel and it&#39;s sturdy enough to lift a bar loaded with 600lb. Solid welds seams ensure the stability of the base.<br>Built-in Pullback Handle---Covered with a rubber sleeve to ensure a firm and stable grip. Also built for portable use.BRTGYM jack is 5.73lb weight itself, take it to professional gyms is ok.<br>2inch Wide Gap Fit 2inch/1inch Olympic Bars---The gap at the top is 2inch wide with plenty of room to hold a universal barbell. Padded with black UHMW plastic to protect the knurling on your nice barbells.<br>Compact Mini Barbell lift---Lightweight bar jack only takes up little space, a perfect alternative for your garage home gym with limited space. Total Length: 17.7&quot;,Total Width: 4.5&quot;,Total Height: 10&quot;.

BRTGYM T Bar Row Landmine Attachment for 2" Olympic Barbell Bars, Workout Home Gym Equipment

Space Saving——The barbell bent-over row is a common practice at most gyms and uses barbells or dumbbells to engage the back muscles fully. With our BRTGYM landmine attachment, you can do it at home.Great for small spaces like living rooms and garages.<br>Sturdy and Strong——Strong Welding and made of durable steel, black powder-coated for anti-corrosion.<br>Fit 2" Olympic Barbell &Easy to install——8.5" long tube for safety security. Simply insert the barbell into the tube, and adjust the heft as you see fit. And then tighten the knob for a secure workout.<br>ABS tube sleeve to prevent barbell being scratched. And flanging bearing bushing is designed to prevent wear too.<br>Multiple Exercises——360° rotating features allows multiple workouts：haft kneeling shoulder press, lateral lunge, landmine press, overhead squat,etc.